Improve the temperature of diesel engine cooling water The temperature of agricultural diesel engine is generally lower than 45 Â°C, so that diesel can not be completely burned, oil viscosity, increased operating resistance, which consumes more fuel, it is necessary to increase the temperature of diesel engine cooling water.
To ensure the best fuel supply rake angle for the most commonly used 195-type diesel engine as an example, the optimal angle of the fuel supply advance angle is 16 degrees-20 degrees. When the diesel engine is used for a period of time, due to wear and tear, the fuel supply advance angle will be reduced, resulting in too late oil supply and fuel consumption. Therefore, the oil supply angle should be ensured at the best angle.
Ensure that the machine does not leak oil The diesel engine oil pipe often has holes due to uneven joints, gasket deformation or damage. The solution is: The gasket is coated on the glass plate with a valve paint and flattened to correct the tubing connector.
The additional diesel recovery device can use a plastic pipe to connect the return pipe on the nozzle to the air core screw so that the return oil flows into the fuel tank.
More than half of the faults in the diesel engine before the oil was used out of the fuel supply system. The solution is: buy back the diesel 2-4 days after settling and then use, you can precipitate 98% of the impurities; if you are buying now, you can put two layers of silk or toilet paper in the fuel tank filter screen.
Change the "big horse-drawn car" practice wells commonly used on the "big machine with a small pump." It is actually a waste. Improvement measures: appropriately increase the number of diesel engine pulleys, increase the speed of the pump in the case of diesel engine running at a reduced speed, increase the flow rate and lift, and achieve the purpose of energy saving.
Adjust injector fuel injection pressure
The injection pressure of the 195 diesel fuel injector is 120+5 kg/cm2. When the injection pressure is less than 100 kg/cm2, the fuel consumption increases by 10-20 g/kWh, and the pressure on the injection pump can be directly checked and adjusted by the comparison method.
Obstetric Delivery Table is suitable for gynecological diagnosis and examination, child-birth, caesarean operation and other gynecological surgical operations. Its height adjustment, back section and sitting section adjustment are precisely and smoothly controlled by pus rod. The low voltage system ensures user`s safety. The table has an aesthetically beautiful bodyline and the bed mattress is soft and made of leatheroid, which makes them easy to be taken off, cleaned and sterilized.
Obstetric Delivery Table
Obstetric Delivery Table,Gynecology Delivery Table,Delivery Table,Operating Table For Delivery
Shandong Lewin Medical Equipment Co., Ltd. , https://www.lewinmed.com