Scientific installation and use of aerators

Opening the aerator can not only increase the amount of dissolved oxygen in the water, but also eliminate harmful gases. The impeller-type aerator can also stir the water and promote the exchange of water between the upper and lower layers. Scientific installation and use of aerators can ensure the safety of water production. First, the installation method: Generally, install two aerators per acre of water surface is appropriate, the method is: (1) two aerators should be installed in the same diagonal. (2) The aerator can be fixed on two floating buckets or cement piles, so as to not affect the normal operation of the aerator. (3) The position of the impeller in the water should be aligned with the "waterline". If there is no "waterline", the top surface is generally parallel to the water surface. The depth of the impeller blade immersed in the water is 4 cm, too deep will cause the motor load to increase and damage. (4) When the aerator is working, the agitated pool water should be even and the coverage area is 6-8 square meters. Second, safe operation (1) Cut off the power when installing. The cable is fixed to the frame with a locking clip and must not sink into the water. (2) After the aerator is started in the pool, the torsion is large and it needs to be fixed. When the impeller rotates, the resulting waves are large and must not be observed with floaters before the aerator. (3) If the aerator is sounded when working, check the circuit. If there is a missing phase operation, the power supply should be cut off immediately. After connecting the line, turn it on again. (4) The shield is a device that protects the power supply from rain and should be properly installed; the terminal box is vulnerable to water erosion and should be protected. (5) When the aerator is started, if there is abnormal noise, reverse rotation, or unstable operation, stop the machine immediately and remove the abnormality before starting the machine. (6) Aerators shall be equipped with thermal relays, temperature relays, thermistor protectors, and electronic protection devices. (7) Remove wraps or attachments on the impeller in time. The floating body should be inspected once a year to avoid reducing buoyancy due to wear of the floating body, resulting in increased motor load and burnout. (8) When the aerator is launched, the whole should be kept horizontally moved into the water to prevent the vent hole of the reducer from spilling oil. The motor must not be in contact with water. Third, energy-saving measures: According to the following three hours to start, you can save about 60% of electricity. (1) Turn on the machine before dawn. At this time, the pressure is low. Fish and various animals and plants have consumed one night's oxygen. The oxygen content in the pool water can be restored to 4 mg/L or more after being turned on for 1-2 hours. (2) Turn on the machine from 8:30 in the morning to 10:30 in the morning. At this time, it is the best time of daylight illumination. After starting 1-2 hours, in addition to adding oxygen to the water, it can also promote pool water exchange and use photosynthesis of phytoplankton to increase the amount of dissolved oxygen in the pool. (3) Turn on the phone from 3pm to 5pm. At this time, the temperature is higher and the water temperature rises. The amount of dissolved oxygen in the pool decreases as the water temperature increases. The metabolism of the fish is strong and the oxygen consumption increases. At this point, the power is turned on for 1-2 hours. In addition to supplying oxygen directly to the water to meet fish growth needs, the most important thing is to store large amounts of oxygen to ensure night-time needs.

We supply specialties, which is food indicated to have specific health functions. That is suitable for specific food groups, can regulate body functions, not to treat the disease for the purpose of food.


1. Materials or ingredients used by the conventional food processing.
2. In the usual form and method of ingestion.
3. Marked with a label biological adjustment functions.

Nutritional Specialties

Nutritional Supplements,Nutritional Products,Regional Specialties,Nutritional Specialties

Sinochem Jiangsu Co., Ltd. , http://www.sinochemnutrition.com