Tea packaging machine, tea bag packaging machine needs to maintain and maintain

Fault phenomenon

cause of issue

Adjustment and elimination methods

Some mechanisms do not rotate

Motor or motor open circuit

Replace or switch on

The machine is running abnormally

There is a foreign object falling into the gear or the rotating part

Downtime processing

Heat sealing

The bearing part of the heat sealing roller is not refueled

The gear is detached, oiled, fastened

Poor sealing of the bag

The left and right pressure of the heat sealing roller is uneven

Heat sealing left and right pressure adjustment

Heat seal roller has loss

replace

Heat sealing roller seal is not clean

Copper brush

The quality of the wrapping paper itself

With packaging paper manufacturers

Copper sleeve wear

Replacement of copper sleeve

Not sealed

Heating element burned out

Replace heating element

Poor electrical components

Check replacement

Wrinkle problem and packaging film edge banding

The line of the packaging film does not match the size of the hot roll

See the adjustment diagram of the former

Molding adjustment problem

See the adjustment diagram of the former

There is a material on the seal side, and the material leakage phenomenon

Material drop time is different (cause of air resistance)

See the adjustment of feeding and delivery time for details.

Bagging time is not coordinated with heat sealing time

See the adjustment and schematic diagram of the transverse sealing roller for details.

Poor incision

Cutter gear wear

replace

Unfavorable or damaged blade edge

Replace the blade or repair with oilstone

Moving knife and fixed knife gap are not adjusted

Adjusting the compression bolt